description this series of bi-color chipleds is designed with the small - est footprint to achieve high density of components on board. they have the industry standard footprint of 1.6 mm x 0.8 mm and a height of only 0.5 mm. this makes them very suitable for cellular phone and mobile equip - ment backlighting and indication. they are available in a wide range of color combinations. in order to facilitate automated pick and place operation, these chipleds are shipped in tape and reel, with 4000 units per reel. these parts are compatible with refow soldering. hsmf-c16x miniature bi-color surface mount chipleds datafsheetf f f f eatures ? small size ? 0603 industry standard footprint ? difused optics ? operating temperature range of C30?c to +85?c ? compatible with refow soldering ? available in various color combination ? available in 8 mm tape on 7" (178 mm) diameter reels applications ? keypad backlighting ? symbol indicator ? lcd backlighting ? pushbutton backlighting ? front panel indicator caution: hsmf-c16x leds are class 1a esd sensitive per jesd22-a114c.01 standard. please observe appropriate pre- cautions during handling and processing. refer to avago technologies application note an-1142 for additional details. devicefselectionfguide partfnumber f color f packagefdescription hsmf-c162 alingap red / alingap amber untinted, difused HSMF-C163 alingap red / ingan green untinted, difused hsmf-c164 alingap red / ingan blue untinted, difused hsmf-c165 high efciency red / gap green untinted, difused hsmf-c166 gap yellow / gap green untinted, difused hsmf-c167 gap orange / gap green untinted, difused hsmf-c168 ingan green / ingan blue untinted, difused hsmf-c169 alingap amber / ingan blue untinted, difused f
2 packagefdimensions absolutefmaximumfratingsfforfeachfdiefatft a f=f25?c parameter f alingap f ingan f gap f units dc forward current [1] 20 10 20 ma power dissipation 48 38 52 mw reverse voltage 5 5 5 v led junction temperature 95 95 95 ?c operating temperature range C30 to +85 ?c storage temperature range C40 to +85 ?c soldering temperature see refow soldering profle (figure 6 & 7) note: 1. derate linearly as shown in figure 4. notes: 1. all dimensions in millimeters (inches). 2. tolerance is 0.1 mm ( 0.004 in.) unless otherwise specified. 1.6 (0.063 ) 0.16 (0.006) 0.5 (0.020) 0.4 (0.016) led dies diffused epoxy pc board soldering terminals 0.8 (0.031) cathode line 0.3 (0.012) cathode line 1 2 3 4 polarity 1 3 hsmf-c162 amber 2 4 red HSMF-C163 green red hsmf-c164 blue red hsmf-c165 green red hsmf-c166 green yellow hsmf-c167 green orange hsmf-c168 blue green hsmf-c169 blue amber
3 electricalfcharacteristicsfatft a f=f25?c f f f f reverse f f f f f breakdown f capacitance f thermal f f forwardfvoltage f f v r f(volts) f cf(pf),f@fv f f=f0,f resistance f f v f f(volts)f@fi f [1] f f @fi r f=f100faf ff=f1fmhzf r j-pin f(?c/w) f color f f typ. f max. f min.f typ. f typ. alingap red 20 ma 1.9 2.4 5 15 300 alingap amber 20 ma 1.9 2.4 5 11 300 alingap red [2] 10 ma 1.8 2.3 5 15 300 alingap amber [2] 10 ma 1.8 2.3 5 11 300 ingan green 10 ma 3.4 3.8 5 35 500 ingan blue 10 ma 3.4 3.8 5 35 500 her 20 ma 2.1 2.6 5 5 325 gap orange 20 ma 2.2 2.6 5 7 325 gap yellow 20 ma 2.1 2.6 5 6 325 gap green 20 ma 2.2 2.6 5 9 325 opticalfcharacteristicsfatft a f=f25?c f f f f f color f f f f f peak f dominant f f luminous f f luminousfintensity f f wavelength f wavelength f viewingfangle f efcacy f f i v f(mcd)f@fi f [1]f f peak f(nm)f d [2] f(nm)f 2f 1/2 fdegrees [3] f v f(lm/w) f color f f min.f typ. f typ. f typ. f typ. f typ. alingap red 20 ma 28.5 90 637 626 120 155 alingap amber 20 ma 28.5 90 595 592 120 480 alingap red [4] 10 ma 11.2 35 637 626 120 155 alingap amber [4] 10 ma 11.2 35 595 592 120 480 ingan green 10 ma 18 45 523 525 120 500 ingan blue 10 ma 2.8 10 468 470 120 80 her 20 ma 2.8 10 636 621 120 145 gap orange 20 ma 2.8 8 605 604 120 380 gap yellow 20 ma 2.8 8 589 586 120 500 gap green 20 ma 4.5 15 570 572 120 595 notes: 1. v f tolerance: 0.1 v. 2. the product testing is based on 20 ma. this is for reference only. notes: 1. the luminous intensity i v is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. the dominant wavelength d is derived from the cie chromatically diagram and represents the perceived color of the device. 3. 1/2 is the of-axis angle where the luminous intensity is 1/2 the peak intensity. 4. the product testing is based on 20 ma. this is for reference purpose.
4 intensityf(i v )fbinflimits [1] f intensityf@f20fmaf(mcd) f binfidf min.f max. a 0.11 0.18 b 0.18 0.29 c 0.29 0.45 d 0.45 0.72 e 0.72 1.10 f 1.10 1.80 g 1.80 2.80 h 2.80 4.50 j 4.50 7.20 k 7.20 11.20 l 11.20 18.00 m 18.00 28.50 n 28.50 45.00 p 45.00 71.50 q 71.50 112.50 r 112.50 180.00 s 180.00 285.00 t 285.00 450.00 u 450.00 715.00 v 715.00 1125.00 w 1125.00 1800.00 x 1800.00 2850.00 y 2850.00 4500.00 tolerance: 15%. colorfbinflimits [1] f yellow/amberfcolorfbins [1] f dom.fwavelengthf(nm) binfidf min.f max. a 582.0 584.5 b 584.5 587.0 c 587.0 589.5 d 589.5 592.0 e 592.0 594.5 f 594.5 597.0 tolerance: 0.5 nm f inganfgreenfcolorfbins [1] f dom.fwavelengthf(nm) binfidf min.f max. a 515.0 520.0 b 520.0 525.0 c 525.0 530.0 d 530.0 535.0 tolerance: 1 nm note: 1. bin categories are established for classif - cation of products. products may not be available in all categories. please contact your avago representative for information on currently available bins. note: 1. bin categories are established for classif - cation of products. products may not be available in all categories. please contact your avago representative for information on currently available bins. f greenfcolorfbins [1] f dom.fwavelengthf(nm) binfidf min.f max. a 561.5 564.5 b 564.5 567.5 c 567.5 570.5 d 570.5 573.5 e 573.5 576.5 tolerance: 0.5 nm f bluefcolorfbins [1] f dom.fwavelengthf(nm) binfidf min.f max. a 460.0 465.0 b 465.0 470.0 c 470.0 475.0 d 475.0 480.0 tolerance: 1 nm f orangefcolorfbins [1] f dom.fwavelengthf(nm) binfidf min.f max. a 597.0 600.0 b 600.0 603.0 c 603.0 606.0 d 606.0 609.0 e 609.0 612.0 f 612.0 615.0 tolerance: 1 nm
5 figuref2.fforwardfcurrentfvs.fforwardfvoltage. figuref1.frelativefintensityfvs.fwavelength. figuref3.fluminousfintensityfvs.fforwardfcurrent. 400 100 0 600 700 20 relative intensity ? % wavelength ? nm 500 hsmf-c16x fig 1 60 40 80 450 550 650 10 50 30 70 90 ingan blue ingan green as amber as red as orange 100 10 1 0.1 1.5 2.5 3.5 4.0 v f ? forward voltage ? v i f ? forward current ? ma 3.0 hsmf-c16x fig 2 2.0 ingan as alingap 0 5 15 i f ? forward current ? ma 0 0.4 1.4 luminous intensity (normalized at 20 ma ) hsmf-c16x fig 3a 30 0.8 0.2 1.0 10 0.6 1.2 as alingap 20 25 0 4 12 i f ? forward current ? ma 0 0.4 1.4 1.6 luminous intensity (normalized at 10 ma ) hsmf-c16x fig 3b 16 0.8 0.2 1.0 8 0.6 1.2 2 6 10 14 ingan gap green gap yellow gap orange her 500 550 600 650 700 750 wavelength - nm relative intensity 1.0 0.5 0 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 v f ? forward voltage ? v i f ? forward current ? ma 100 10 1 0 her gap orange gap yellow gap green 0 5 15 i f ? forward current ? ma 0 0.4 1.0 luminous intensity (normalized at 20 ma ) 20 0.6 0.2 0.8 10 30 1.4 25 1.2 gap
6 figuref4.fmaximumfforwardfcurrentfvs.fambientf temperature. figuref5.frelativefintensityfvs.fangle. figuref7.frecommendedfpb-freefrefowfsolderingfprofle. figuref8.frecommendedfsolderingfpadfpattern. hsmf-c16x fig 5 relative intensity ? % 100 0 angle 80 60 50 70 20 10 30 40 90 -70 -50 -30 0 2 0 3 0 5 0 7 0 9 0 -90 -20 -80 -60 -40 -10 10 40 60 80 hsmf-c16x fig 7 0.70 (0.028) 0.70 (0.028) 0.30 (0.012) 0.40 (0.016) 0.60 (0.024) 0.40 (0.016) 0 25 0 20 60 80 100 5 i f max. ? maximum forward current ? ma t a ? ambient temperature ? c 40 15 20 10 10 30 50 70 90 ingan alingap/gap figuref6.frecommendedfrefowfsolderingfprofle. 230 c max. 10 sec. max. 4 c/sec. max. over 2 min. time temperatur e 4 c/sec. max. 140-160 c 3 c/sec. max. 217 c 200 c 60 - 120 sec. 6 c/sec. max. 3 c/sec. max. 3 c/sec. max. 150 c 255 - 260 c 100 sec. max. (acc. to j-std-020c) 10 - 30 sec. time temperature
figuref9.freelingforientation. figuref10.freelfdimensions. x x x x x x x x x x x x x x x x x x x x cathode side printed label user feed direction x x x x x note: 1. all dimensions in millimeters (inches). 10.50 1.0 (0.413 0.039) 59.60 1.00 (2.346 0.039) ? 20.20 min. (? 0.795 min.) 6 ps 178.40 1.00 (7.024 0.039) 3.0 0.5 (0.118 0.020) 4.0 0.5 (0.157 0.020) 5.0 0.5 (0.197 0.020) ? 13.1 0.5 (? 0.516 0.020) 8.0 1.0 (0.315 0.039)
8 figuref11.ftapefdimensions. figuref12.ftapefleaderfandftrailerfdimensions. hsmf-c16x fig 15 en d start there shall be a minimum of 160 mm (6.3 inch) of empty component pockets sealed with cover tape. mounted with components. there shall be a minimum of 160 mm (6.3 inch) of empty component pockets sealed with cove r tape . minimum of 230 mm (9.05 inch) may consis t of carrier and/or cover tape . notes: 1. all dimensions in millimeters (inches). 2. tolerance is 0.1 mm ( 0.004 in.) unless otherwise specified. 8.00 0.30 (0.315 0.012) user feed direction dim. a (see table 1) 3.50 0.05 (0.138 0.002) 1.75 (0.069) dim. c (see table 1) 0.20 0.05 (0.008 0.002) carrier tape cover tape dim. b (see table 1) 4.00 (0.157) 2.00 0.05 (0.079 0.002) 4.00 (0.157) 1.50 (0.059) table 1 dimensions in millimeters (inches) cathode dim. a 0.10 ( 0.004) dim. b 0.10 ( 0.004) part number dim. c 0.10 ( 0.004) hsmf-c16x series 1.75 (0.069) 0.95 (0.037) 0.60 (0.024)
refowfsoldering f for more information on refow soldering, refer to ap - plication note 1060, surface mounting smt led indicator components . storagefcondition: 5 to 30?c @ 60% rh max. baking is required under the condition: a) the blue silica gel indicator becoming white/trans - parent color b) the pack has been opened for more than 1 week baking recommended condition: 60 5?c for 20 hours. for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies, limited in the united states and other countries. data subject to change. copyright ? 2007 avago technologies, limited. all rights reserved. obsoletes 5989-4810en av02-0584en - july 23, 2007
|
